Instructions For Application You Will Need The Following:
- Damp rag or cloth
- Smooth, Flat Surface
- We recommend having a someone else help you if its a larger decal.
Not following these directions will result in poor application and poor adhesion to your wall. This will not constitute a refund or reprint. Unroll your WallSplot and lay it flat on the floor. Allow it to sit out for 10 – 15 minutes in order to adjust to room temperature. Find a good spot for your WallSplot. Pick a smooth flat wall. Clean the wall with a damp cloth and dry thoroughly. WallSplots will not stick to textured, dirty, stained or wet walls. Remove WallSplots from its backing. Do not discard backing paper, put it back into the tube or box. You’ll thank us later for this tip. Starting in the middle and working toward the edges, stick your Wall-Splots to the wall. Avoid touching the adhesive. Pull it apart slowly and continue. You can now push out any bubbles working from the inside out. If you have a huge bubble, pull up the closest edge, and lay it back down. If youre happy with its position, push firmly on it to make sure it sticks. You can also use the squeegee we have provided to go over your WallSplots a few times, the more the better. Take great care on the edges pushing firmly. If one curls up, push it back down. If you are moving to a new home, or changing the WallSplot to a new location, put it on the backing paper it came with. If you no longer have it, use wax paper on the back of it.
If you are having trouble, please email us at: info@wallsplots.com or call: 570-208-2528 |
Shopping Cart
